recent posts

Wednesday, May 11, 2011

Guest Post: Make Paper out of Dryer Lint

Learn how to make paper out of dryer lint with this great tutorial from Melinda.


I thought I'd share how I made the base for my Artist Trading Card that I created. You can then use this unique & beautiful paper for gift tags, note cards, or as part of a collage or other scrap booking project. Thanks to The Go Green Blog and Instructables for the basic tutorial steps!

Turn Dryer Lint Into Paper

Project Estimate:
  • Lint, on hand

  • Warm water, on hand

  • Wood frame, on hand, or $1

  • Window screening or pan splatter screen, on hand, or $1

  • Scissors to cut the screening,on hand

  • Staple gun or hammer and nails (only if you use the window screening), free and up

  • Tub, on hand

  • Blender, on hand

  • Towels , on hand

Total: Free and up


Click photos for a larger image

Step 1 – Soak the LintStep 1: Soak Lint

The first step is to soak the lint in warm water for at least 30 minutes. This helps the lint to break down so that it’s easier to blend during the next step. You should soak the lint in warm water until it becomes saturated and soft, the longer the better. If you have the time then soak the lint over night.

Notes: To get a specific color of lint, either dry that color of clothing, or add food dye (I added purple to the batch in the picture) to the water when you let the lint soak.

You can also add other ingredients to be soaked in the water like shredded paper (Use plain white or colored. If you use paper that is printed on, the ink will run and dye the whole mix)) or leaves and flowers. Both paper and leaves will give the lint paper more body in the end. (I added the paper in at the blender step, and it didn't get broken up and mixed in - it showed up as speckles. Decide now how you want your end-product to look so you know if you should soak your paper or wait until the blender step.)

If you want your paper to be sturdier, add some corn starch slurry (pre-mixed warm water and corn starch), just like you would to thicken gravy.

Step 2 – Create the MoldStep 2: Create the Mold

If you decide to use screening and frames, view the Instructables tutorial.

I went for cheap and easy - I went to my local Dollar Tree and purchased a splatter screen (similar to the one pictured) and a wooden 4x6 picture frame with the glass and backing removed. I also made a few smaller pieces using metal cookie cutters!

Step 3 – Blending the LintStep 3: Blend the lint

The next step is to liquefy the lint in a blender.

Scoop about one cup of lint and put it in the blender, then add water to fill the rest of the blender until it is close to the top. (If you fill it too much, water may try to escape out from under the lid, so be careful!)

There should be more water than lint in the blender. Blend until it is smooth and mushy. (We had an old smoothie blender, so we could use the "stick" to make sure all the pieces were evenly blended)

Step 4 – Filling the MoldStep 4: Fill Mold

If you used a deckle and mold, follow the Instructable tutorial for this step.

If you used a splatter guard and a frame or cookie cutter, balance the splatter guard on the edge of your tub (to catch the runoff water). Hold the mold firmly on the screening (I had help doing this so that nothing would leak out the sides and ruin the shape of my final project). Pour slurry into mold. You want to be sure to pour it in evenly over the surface so you don't have any bare spots showing. Pour in a little for thin paper (but be careful - if it's too thin, it will fall apart), or pour in a lot for thicker paper. This is a great time to experiment with thickness. If you don't like it after the next step, just throw it back in the blender!

Note: My cookie cutter mold is pictured to the right. To use a picture frame, put the flat surface on the bottom (my frame had some beveling on the front). That way you get a nice, clean shape.

Step 5 – SiftingStep 5: Sifting

If you used a deckle and mold, follow the Instructable tutorial for this step.

If you used a splatter guard and a frame or cookie cutter, sift the mold and mush the slurry around a little to get it in all the corners, and even things out a bit. Having an extra set of hands to hold the frame down to the screen was helpful because the screen was a little flexible, so we wanted to make sure the frame was tight against the screen. Then let it sit for a few seconds to drip (I even pushed down on the slurry some to push out the extra water and make sure I had an even coating).

Step 6 – Off the Mold and onto the FabricStep 6: Remove From Mold

Now place the mold face down onto a piece of fabric or a towel so that the lint is on the fabric. (If you used a cookie cutter or frame, gently remove the paper and leave it on the screen).

Use a sponge (or the top half of the towel as shown on right side of photo) to press the lint onto the fabric and to soak up excess water.

Then slowly lift the mold/screen off of the fabric so that the lint is left.

Step 7 – Last StepFinished Paper

If you are making multiple pieces of paper, then place another piece of fabric/towel on top of the lint and repeat the process. Once you are finished you can add books on top of the stack of fabric to flatten out the paper and press out the water.

After several hours (mine took about 6 hours indoors) remove the books and allow the lint to completely dry.

If the paper still seems really wet, swap out the towels for dry ones, and repeat the process. If you don't use the books, you will get bendy paper as it dries, so this is important. If you don't use any plant material, you may be able to iron the paper a little through a towel.

Once the lint is dry, you have your very own Lint Paper! After mine dried, I glued on some dried flowers. On another piece, I added some Prima paper flowers with rhinestones.

Try it with different colors of lint, food coloring and paper you added to the mix. Also try different additions - leaves, flowers, glitter, anything you can think of! Each piece of paper is it's own work of art!

Very cool project! Thanks so much for sharing Melinda!


  1. I have a friend that sent me some nice sheets of paper she made and I have been wanting to give it a try but have not yet. Pretty neat recycling the lint.

  2. Well, how about that! I have always felt like I could get some use out of all of that lint I've been tossing out! Thanks for sharing!

  3. What a great idea! I'm always up for trying new ways of using things that would otherwise just be tossed in the garbage. Thanks! ;)


I love to receive and read your comments. It just makes my day! :)

Related Posts Plugin for WordPress, Blogger...